|
|
 |
 |
 |
 |
| Tenryu has been a pioneer in the Japanese saw manufacturing industry for almost a century. It established Tenryu (China) Saw Mfg. Co., Ltd., a wholly-owned subsidiary dedicated to manufacturing in the Langfang Economic and Technical Development Zone, in China, in 1994. Since then, support from representatives of a wide range of industries in China has enabled Tenryu (China) to grow into a modern saw manufacturer employing 639 people. Based on a wealth of development expertise and advanced manufacturing technology from the Japan headquarters, Tenryu (China) today uses carefully selected raw materials to produce high-quality, high-precision saws for industrial use. These saws are supplied to users not only in China but also in countries around the world including North America, Europe, and other parts of Asia to meet diverse needs both today and in the future. Tenryu continues to serve as a pioneer in its efforts to develop and improve its technologies and supply markets with saw products of high quality, low cost, and superior durability. Tenryu looks forward to meeting the ever-changing requirements of the cutting industry with the latest advances in technology.
|
 |
| 1994 |
July: |
Tenryu (China) Saw Mfg. Co., Ltd. was established in China. |
| 1995 |
September: |
Construction of the office building and No. 1 Plant were completed. |
| November: |
Production of diamond saw blanks started. |
| December: |
Production of carbide tipped saw blades started. |
| |
Registered capital was increased from 300 million to 500 million Japanese yen. |
| 1997 |
February: |
Construction of a dormitory for unmarried employees was completed, and a 2-shift system was launched. |
| May: |
Construction of the No. 2 Plant was completed, and the heat treatment furnace started operation. |
| 1998 |
February: |
Production of diamond saw blades started. |
| June: |
Registered capital was increased from 500 million to 800 million Japanese yen. |
| 2002 |
June: |
Registered capital was increased from 800 million to 900 million Japanese yen. |
| 2003 |
September: |
Construction of the No. 3 Plant was completed. |
| 2004 |
March: |
Registered capital was increased from 900 million to 1 billion Japanese yen. |
 |
| |
| Company name: |
Tenryu (China) Saw Mfg. Co., Ltd. |
| Established: |
July 1994 |
| Business range: |
Carbide tipped saw blades, Diamond saw blades, Diamond saw blanks |
| Capital: |
1,000,000,000 Japanese yen |
| President: |
Masanao Takahashi |
| Premises area: |
39,500 square meters |
| Employees: |
639 |
 |
| The saw manufacturing
equipment at Tenryu (China) was developed, researched,
and improved by Tenryu Japan over many years. Tenryu
instituted a careful quality control process through
which it sends its raw materials and production
systems. You can be assured of the highest possible
quality control standards when you see our PAS logo.
This mark is your assurance that our products have
been through our rigorous quality control system.
|
|
 |
|
 |
| Heat Treatment |
|
Brazing |
|
 |
|
 |
| Carbide teeth sharpening |
|
Tensioning of Large Diameter Blades |
|
| 2002 |
January: |
Longlian Tools Corporation was established. |
| May: |
Production started. |
| June: |
The Dalian Office of Longlian Tools was opened. |
| Company name: |
Longlian Tools Corporation |
| Established: |
January 2002 |
| Business range: |
Manufacture of carbide and PCD tools |
| Capital: |
100,000,000 Japanese yen |
| President: |
Shinkichi Saito |
| Employees: |
9 |
|
|
|
